Started to mount the brake pipe through the transmission tunnel to the back of the chassis. Mounted the T piece and the switch
The zetec engine's fuel/air inlet is on the right hand side of the engine so I've decided to route the fuel pipe along same side as the brake pipe so the fuel pipe route won't have to switch from one side to the other nearer the front of the car.
The original rivets which hold the gearbox mount to the sierra gearbox mounting have been ground off today but it needs a good thump to separate one piece from the other
Fuel tank ordered from MK on friday
Rear bearing carriers fitted with new wheel bearings during the week
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment